A lot of concrete, rebar and other materials

From ODOT- Have you ever wondered about the amount of material it takes to construct a new bridge, especially one as large as the new southbound Willamette River Bridge?

Visitors on the project tours often ask this question. Here’s the answer.

The finished portion of the bridge will be made up of 2.7 million pounds of rebar and 7,300 cubic yards of concrete. Rebar is used to add tensile strength to concrete. It is usually made of carbon steel, and has ridges for better anchoring into the concrete.

The rebar ranges from as small as 1/2 inch in diameter up to 2.25 inches. It is labor intensive to install and link all that rebar together before the concrete can be poured.

More steel and a lot of wood was needed to build the work bridge in the river and the supports and wooden falsework where the rebar is installed and concrete poured to build the new bridge. About 14 million pounds of steel was used to drive the piles supporting the work bridge and to support the wooden falsework use to form the bridge arches. The amount of wood used on the work bridge and falsework exceeds 2 million board feet and includes 2-by-4’s, 8-by-8’s and many sheets of plywood.

The crew building the bridge used these materials to create the arches you now see spanning the river and the bridge supports and beams south of Franklin Boulevard.

On a side note, the web cam is operational again, check it out.